| | Go up | .. |
| | kryos777 prefabs | useful stuff from gabriel (spoonboiler)
[Uploaded by kryos777] |
| | CC4 prefabs | subcontrol examples, glissando, and more
[Uploaded by tvperson] |
| | Klanglabs - Prefabs | Source projects and prefabs
[Uploaded by matias_monteagudo] |
| | JoBro Media prefabs | Some of JoBro Media / True Software Teams prefabs.
[Uploaded by johan_brodd2000] |
| | Sequencer Prefabs | sequencer methods and components
[Uploaded by k9k9dog] |
| | Ben's prefabs | Random non basic fx I come up with
[Uploaded by benalthauser] |
| | SirSickSik | Prefabs made by SirSickSik, such as 4to1 signal morph, patchmorph, preset-abled knobs (next to the patch-select module) and voltage-cable bundler. as long as you get a lot more in less time ;)
[Uploaded by sirsicksik] |
| | Steve D's Prefabs | Prefabs created by Steve Duell
[Uploaded by rubik909] |
| | Saltline | Prefabs
[Uploaded by tedkanashi] |
| | Buncs Prefabs | misc prefabs
[Uploaded by buncanm] |
| | _Selective Showing | Limiting Choices & Visibility
[Uploaded by greeffbf] |
| | Sean's Effect Bank | Effects build with CK, AF and DH's module
[Uploaded by seanphilipsus] |
| | DDR | DestraDecibelResearch
[Uploaded by methypnox] |
| | chinkialprefabs | daft stuff
[Uploaded by chinkial] |
| | Iain's Prefabs | Compressors/Limiters and more
[Uploaded by audioiain] |
| | stk prefabs | bits from arcDev Noise Industries
[Uploaded by bindingvoid] |
| | MV's Pitch Extractor | Audio pitch extraction based on delay and cancellation
[Uploaded by martinvicanek] |
| | Some Useful Prefabs | assorted prefabs
[Uploaded by k9k9dog] |
| | Dom's Prefabs | Any stuff I make
[Uploaded by aversanomusic] |
| | Pippo's Prefabs | [Uploaded by synthipippo86] |
| | Plutoniq Prefabs | [Uploaded by plutoniq9] |
| | DVS_Scale_Select.se1 | You select key and minor/major scale - prefab will output boolean values for each note: T=included in scale, F=not included. Also features manual editing of scales. Needs DH_subcontrol_pak_1 and KDL's convertors.
[Uploaded by eshpar] |
| | X-Mod Osc.se1 | xmodosc
[Uploaded by resofactor] |
| | VeloDADSR1.ZIP | Velocity Controllable DADSR prefab, with controls inside container for use as a sub-panel. Requires Version 0.942.2.
[Uploaded by zip_oleighter] |
| | Velocity Control.se1 | Velocity control with adjust
[Uploaded by andywanders] |
| | DH_quantised_knob.se1 | using a lot of DH modules to make the knob 'steppy' , change the multiplier text2
[Uploaded by angstrom_000] |
| | load_dialog.se1 | Use any picture as a load icon, instead of the windows folder icon
[Uploaded by angstrom_000] |
| | PhaseShift.zip | Updated version of the former "PhaseDelay". Now also loads in official SE release.
[Uploaded by christg74] |
| | FMExample.zip | Updated example of 6op FM synth
[Uploaded by mattpinchin] |
| | BPM to Delay update.se1 | Update, BPM host to delay time conversion prefab, based on PJ "BPMtoDelay"
[Uploaded by matias_monteagudo] |
| | EnvelopeOsc.zip | Unusual Osc, made from a looped ADSR
[Uploaded by ikaldor] |
| | UD-REVERB WITH PREDELAY.zip | UD-REVERB with Predelay and on/off button. One with CK delay and the other with SE Delay2
[Uploaded by ginocote] |
| | tb_pansticks.se1 | tweakbench stereo control joysticks
[Uploaded by neonarcade] |
| | tb_phase.se1 | tweakbench phase modifier module
[Uploaded by neonarcade] |
| | tb_ccrandomize.se1 | tweakbench cc randomzier module
[Uploaded by neonarcade] |
| | Tuned_CKDelay.zip | Tuned delay line using CK_Delay and Volt2Freq
[Uploaded by platinumears2002] |
| | DVS_Phase_Meter.zip | Translates decimal to 15-bit binary number (so decimal range is 0 to 32,767). Created by DiVerSe for plutoniq9
[Uploaded by eshpar] |
| | DVS_Binary_Translator.se1 | Translates decimal to 15-bit binary number (so decimal range is 0 to 32,767). Created by DiVerSe for plutoniq9
[Uploaded by eshpar] |
| | Prog_Change_Timed_Munge.zip | Timed program change triggered by held MIDI note in, uses Dave Haupt's MIDI Munger module
[Uploaded by steve_hamann] |
| | My_Leslie.se1 | This prefab shows how I obtain the Leslie effect inside the ORGANized vst tonewheel organ ( download it at http://www.soundfonts.it/vst/ORGANized ).
[Uploaded by ziokiller] |
| | AGC Compressor.se1 | This is revised version based on audioiain's wonderful work, I changed it into stereo and delete peak meter. But I hope it could be less CPU usage.
[Uploaded by seanphilipus] |
| | BPM synced LFO.se1 | This is no true MIDI clock but rather an analog pulse clock.
[Uploaded by mortiance] |
| | LL-Dot Matrix Display.zip | This is a Display that will interact to music or a slider in pattrens. Also the bitmaps or included.
[Uploaded by djleroy432] |
| | Dual Pitch Wheel.zip | This control allow you to set up a variable mode pitch bend wheel.Like modern keyboards, you can set different range for up and down wheel. Else you can activate, using CC04 (Foot Pedal) another bend range like ribbons.
[Uploaded by axiombass] |
| | postDawn_Random_CV_&_Tone_Generator.zip | there is no clock. randomness means out of control, near-completely. Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Waveform menu when you restart SynthEdit.
[Uploaded by toda_v] |
| | dbl-click_reset.se1 | the latest structure (KDL modules http://www.rubyhex.com/synthedit/ )
[Uploaded by mbreges] |
| | LFO_Control_Switch.zip | Switch between BPM synced & free running LFO rates, with paged controls
[Uploaded by platinumears2002] |
| | peak_meter_with_reset.zip | stock SE Peak meter prefab with latched peak indicator & reset. Requires KDL_Volts2GUIBool module. Not sure whether it suits all applications of level metering. See for yourself.
[Uploaded by bayantheone] |
| | stereo-xfade.se1 | Stereo x-fader
[Uploaded by efmsynth] |
| | SF_stereowidth.se1 | stereo width control like in fruity loops
[Uploaded by sonicflash1980] |
| | Bass_Boost.zip | Stereo Bass Boost using SV filters
[Uploaded by platinumears2002] |
| | soundfont_osc_display_hidden.se1 | Soundfont Oscillator display partially hidden so that 'LOAD' button can only be seen.
[Uploaded by mbreges] |
| | 4chan_mute-solo.zip | soloing / muting drums
[Uploaded by mbreges] |
| | rzs-SOLA.zip | SOLA (Synchronous OverLap and Add) time stretching effect.
[Uploaded by rammerzs] |
| | Custom_file_dialog.zip | Skinnable file dialog using new subcontrols using v.0.9540
[Uploaded by steve_hamann] |
| | Reverb Swicth.se1 | Simple Switch to On/off the UD-Reverb
[Uploaded by christo732003] |
| | rzs-Stopwatch.zip | Simple stopwatch
[Uploaded by rammerzs] |
| | Station_Pad.zip | Simple SF osc synth sent with skin and se1 file. Also an example of how to put preset select, load and save in your VST's using the subpanel. Hope someone likes it please fill with SF's presets and send out as vst I have no good SF's
[Uploaded by crossingwires63] |
| | PilchShifter.se1 | Simple Pitch shifter using CK Modules
[Uploaded by fat_ass_tk] |
| | RJ speed up chorus.se1 | Simple chorus with speed up/slow down and complex LFO
[Uploaded by jelliffe_rick] |
| | BPM Pulse Clock.zip | simple analog pulse clock counted by beats per minute (knob). Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Waveform menu when you restart SynthEdit.
[Uploaded by toda_v] |
| | SR Flip Flop.se1 | Set/Reset Flip Flop (4013)
[Uploaded by efmsynth] |
| | DH_OmniStepper-Demo.se1 | Sequencer made with DH_Omnistepper by UnderTow
[Uploaded by uppertow] |
| | patch select.se1 | Selects patches via controls on GUI. KDL_GUIList2MIDI module required.
[Uploaded by mbreges] |
| | Wave Selector.se1 | select wave forms - excludes white and pink noise
[Uploaded by the_arketype] |
| | Output router.se1 | Select between 2 paged panels with one button. Also re routes the input between 2 outputs.
[Uploaded by mattpinchin] |
| | Output router2.se1 | Same as output router but for stereo sources. ie 2 in 4 out
[Uploaded by mattpinchin] |
| | MIDI_Note_Learn.zip | Required modules can be found here: http://www.dehaupt.com/SynthEdit/semodules.htm
[Uploaded by mbreges] |
| | VCSwitch.se1 | Replacement for DH VC Switch
[Uploaded by dhaupt72] |
| | waveView.zip | Real-time representation of audio with zoom in/out (see waveView in the photos section). A CPU killer so I'm not sure if it's really usable, but it's nice to know that it works :) NOTE: put the BMP and TXT files in default skin folder before openning the SE1 file!
[Uploaded by eshpar] |
| | MP Wave.se1 | Re perfect oscillator
[Uploaded by mattpinchin] |
| | RANDOMLIST1.se1 | Random List Values
[Uploaded by shovelglidefxe] |
| | 3_radio_buttons.se1 | radio buttons (sub-controls)
[Uploaded by mbreges] |
| | Scale Quantizer.zip | Quantizes pitch signals to a range of diatonic scales, using standard modules
[Uploaded by platinumears2002] |
| | DVS_Image_Click.se1 | Push the button to make the Image appear/disappear
[Uploaded by eshpar] |
| | OL_linksliders.zip | prefab using subcontrols for linked sliders
[Uploaded by oli_larkin] |
| | tuner frefab.zip | prefab for alternative tuning
[Uploaded by ikaldor] |
| | slew limiter_modton.zip | portamento with ramp up/down
[Uploaded by amiga909] |
| | Popup Menu with selection display.se1 | popup menu with selection display (SE 1.18 standard modules), to populate the menu list connect to 'Choice' and other 'multiple choices' (green) pins
[Uploaded by bayantheone] |
| | Pitch&Mod Wheel.se1 | Pitch wheel and Mod wheel, locking to MIDI keyboard controls, with position output.
[Uploaded by Grogmaster] |
| | Pitch_Shifter.zip | Pitch scaler using the dual modulated delay line method. Scaling is primarily done on a semi-tone basis, but can also be fine tuned. Unzip the .se1 to prefabs/modifiers. [Requires U-MathEv module]
[Uploaded by mrlance123] |
| | NStepCounterbeta.ZIP | Per a discussion on dividing clocks. Requires at least version .092. Select between divide by 1 through divide by 8.
[Uploaded by zip_oleighter] |
| | parsat.zip | parabolic saturator, ported from SynC Modular
[Uploaded by ikaldor] |
| | ParSat(x-mix).zip | Parabolic Saturator (x-mix way)
[Uploaded by ikaldor] |
| | Pan_reset.zip | Pan slider centred by button action - proof of concept using sub-controls
[Uploaded by steve_hamann] |
| | DVS_Slope-Dependant.se1 | Outputs the signal or a constant value - depending on the slope rising/falling
[Uploaded by eshpar] |
| | stk_NoteSelect.se1 | Outputs pitch voltage determined by MIDI note / octave selected. Req v0.9496.
[Uploaded by bindingvoid] |
| | trigger pulse at value change (native modules).zip | outputs a pulse when there's a change in value, what Guido Scognamiglio's 'Muter' and DH_ControlTrigger mods do, but with native mods. Among other things applicable to sample auditioning at selection of a file from a list
[Uploaded by bayantheone] |
| | GC HP LP ONE KNOB.se1 | One knob control LP or HP filter
[Uploaded by ginocote] |
| | Mode Switch.se1 | One button to cycle through mono re-trigger on, mono re-trigger off, and polyphonic modes. Connect to the MIDI to CV module. Updated 20/10/05
[Uploaded by andywanders] |
| | GC Panel Switch _ Volts Switch.se1 | One buton Panel Switch + Volts Switch
[Uploaded by ginocote] |
| | DVS_Animation.se1 | Once triggerred, plays an animation file at a selected rate.
[Uploaded by eshpar] |
| | wierd fabs.zip | note-memory and self-oscill filter
[Uploaded by ikaldor] |
| | Flip Flop.se1 | No Feedback Delay - Flip Flop
[Uploaded by efmsynth] |
| | JChorus.se1 | Nice smooth Chorus, easy on CPU
[Uploaded by watawaste] |
| | MV_ShepardOscillator.se1 | MV's Shepard oscillator project ("endless glissando")
[Uploaded by martinvicanek] |
| | Deep Screw Filta.se1 | Multipole Multifilter with velocity sensitivity. A basic extension of other prefabs. Might speed things up.
[Uploaded by kenneth_harte] |
| | MultiWaveSQ80.zip | Multi waveform osc
[Uploaded by crossingwires63] |
| | Scope400x200.zip | Monitoring the full cycle of low pitched oscillators.
[Uploaded by phuturetone] |
| | tube.se1 | Module to mimic tube distortion - no filters
[Uploaded by karlheinznoise] |
| | MIDI_trigger.se1 | Midi Pitch CV filter
[Uploaded by tranceinstitute2004] |
| | MicrotonalTuner.zip | Microtonal tuner (for historic / non western temperaments) using only native modules.
[Uploaded by platinumears2002] |
| | RMS-Compressor_NoU-Math.zip | Marc's compressor design, modified to use standard modules instead of U-MathEv.
[Uploaded by platinumears2002] |
| | evm_keyboard_map.zip | Maps keyboard pitches to MIDI. For making custom graphic keyboards.
[Uploaded by evmsynths2000] |
| | DVS_Non-Perfect-Square.se1 | Made for Max Fazio - a non-perfect-square oscillator.
[Uploaded by eshpar] |
| | AutoPanner.se1 | LFO driven auto-panner with waveform, rate and depth controls - updated 20/10/05
[Uploaded by andywanders] |
| | tuner prefab.zip | lets you tune each note individually
[Uploaded by ikaldor] |
| | Legato.zip | Legato prefab w/ low and high note priority and portamento, uses Dave Haupt's Min and Max
[Uploaded by mkjnovak] |
| | latching switch.zip | Latching switches using sample N hold ZIP
[Uploaded by digimanse] |
| | GC BYPASS ZERO = FX OFF.se1 | Kind of FX bypass, when your FX Vol. knob is to zero the FX is OFF. I did this to limit CPU usage when a FX is not in use.
[Uploaded by ginocote] |
| | Keyfollower.zip | Keyfollower to manipulate e.g. Attack and Decay depending on Keyboard Note. Adjustable (pos/neg) Amount and Keyboard Keys. Centered on middle C.
[Uploaded by steinund] |
| | PWM_repair.se1 | Keeps pulse width within -5v+5v range
[Uploaded by mbreges] |
| | sequential panels.zip | items are not mutually exclusive but opened in sequence one after another while previously opened ones stay visible
[Uploaded by bayantheone] |
| | DVS_Release_Gate.se1 | It will transmit a 10 volt pulse when note is Released (to trigger "release sounds")
[Uploaded by eshpar] |
| | MIDI automation setup.zip | in SE MIDI learn settings aren't saved with the patch, the workaround is to manually assign CC# through list and 3d party modules, this prefab showcases that, requires 'KDL Volts2MIDI', 'KDL MIDI2GuiFloat' and 'DH_MIDIFilter+' modules
[Uploaded by bayantheone] |
| | Factory.se1 | imagine you stand in a factory ;-) ok this file is nonsense but its fun to play around with.
[Uploaded by fhrdh] |
| | DVS_Equal.se1 | If inA=inB outputs C, if not - outputs zero. Includes an "accuracy slider" for "approximately equal"
[Uploaded by eshpar] |
| | DVS_If-Then-Else.se1 | If - Then - Else prefab (ersae the sliders before you save in your prefab folder - they're in there for demonstration only)
[Uploaded by eshpar] |
| | BPMsyncLFO.zip | Host-Synced LFO Container. See READ ME file for details.
[Uploaded by bones121058] |
| | gate-hold.se1 | Holds gate signal at +5V until reset.
[Uploaded by efmsynth] |
| | Horizontal switch.se1 | Here is a set of switches that switch panels and output a voltage for each. Only 1 switch can be on at a time. Once a switch is on it can only be turned off by selecting a different one. Be careful when editing as this can have unexpected results. Matt
[Uploaded by mattpinchin] |
| | GuitarAmpSim.rar | Guitar Amp Sim
[Uploaded by runbeerrun] |
| | rzs-WaveformDisplay.zip | Graphicaly controllable loop start and loop end settings, zoom and scroll functions.
[Uploaded by rammerzs] |
| | DVS_random-lfo.se1 | Generates random-level LFO. "Random-level" means: Each time the lfo crosses the zero line, it willpeak at a different level.
[Uploaded by eshpar] |
| | 12_Pulse_Train.se1 | generates a 12-pulse train upon receiving gate signal. Created by DiVerSe for Dr. Ambient
[Uploaded by eshpar] |
| | Overtones.se1 | Generate the 1st 32 overtones from sine
[Uploaded by ikaldor] |
| | GC HORIZONTAL BUTTON STACK.se1 | GC Horizontal bouton stack with a optional drop down list to show the choice and a optional choice limiter
[Uploaded by ginocote] |
| | OL_fofexample.se1 | FOF synthesis example
[Uploaded by oli_larkin] |
| | FindNotes.zip | Finds the pitch for each note while one holds a chord
[Uploaded by ikaldor] |
| | Tarrabia_Filter.zip | Filter calculated with standard modules and CK_SampleRate. Also requires David Haupt's Biquad module. Mono and Stereo versions, plus a small demo synth.
[Uploaded by platinumears2002] |
| | shift register prefab.zip | expandable shift register prefab, requires 'KDL Volts2GuiBool' module
[Uploaded by bayantheone] |
| | Prog_Change_Munge.zip | Example of sending program change message by CV using Dave Haupt's MIDI Munger module
[Uploaded by steve_hamann] |
| | RJ see saw filters.se1 | Example of see saw modules: folding the CV into saw and controlling BP filter to simulate high resonant filters
[Uploaded by jelliffe_rick] |
| | bool_toggle.se1 | every other button click outputs different bool value, KDL_Volts2GuiBool module required
[Uploaded by bayantheone] |
| | stk_looping_env.se1 | Envelope with looping section, uses Davip Haup's EnvSeg & ms>Voltage modules. Req v0.9496
[Uploaded by bindingvoid] |
| | HAHDSR-envelope.zip | Envelope generator with "delay" and "Hold" -values Using_Dehaupt_EnvSeg
[Uploaded by elfheart1974] |
| | PF_LS138_example.se1 | Emulation of a 74LS138 (3 to 8 line demux)
[Uploaded by guidogoe] |
| | Fat-Ass-Driv3.se1 | Driv3 distortion algo - Interesting hard shaping algo, sort of a frequency doubler also. It does sound filthy :)
[Uploaded by fat_ass_tk] |
| | custom_osc.zip | draw your own waveforms!!! (12 steps)
[Uploaded by thepieman_2002] |
| | GC DOUBLING.se1 | Doubling FX. If you want to widening your sound try this one
[Uploaded by ginocote] |
| | dbl-clicker.se1 | Double-clicking shows/hides the hint (with gui modules step counter)
[Uploaded by mbreges] |
| | zerosetdelay.se1 | double delay with centre point led and set bettun
[Uploaded by erici44] |
| | Power of two.se1 | Detect if number is power of two (note: expects input to be integer)
[Uploaded by bjoern_nesby] |
| | LFO_Dly.zip | Delays or fades in modulation using standard modules
[Uploaded by platinumears2002] |
| | MIDI CC Switch.se1 | CV to MIDI CC demonstration
[Uploaded by richrd_p] |
| | MIDI Continuous CC.se1 | CV to MIDI CC demonstration
[Uploaded by richrd_p] |
| | MIDI_KBD_SEmodules.zip | custom MIDI keyboard
[Uploaded by mbreges] |
| | 8_Band_Cross-Over_test.se1 | Cross-Over to split signal into 8 bands
[Uploaded by platinumears2002] |
| | 4_Band_Cross-Over.se1 | Cross-Over for splitting a signal into four frequency bands
[Uploaded by platinumears2002] |
| | cross mod.zip | cross modulated osc
[Uploaded by resofactor] |
| | Counter.zip | Counts up or down in user-definable increments
[Uploaded by platinumears2002] |
| | central readout2.zip | Counterpart to popup readout - central readout many knob values linked to a central display
[Uploaded by poly4tune] |
| | pop-up readout.zip | control readout is displayed as long as mouse is depressed, then disappears
[Uploaded by bayantheone] |
| | 3_way_button.zip | control 3 destinations with just one button animated triply, requires Triggerator (introduced in beta 1.1893), DH_MouseDetector, DH_FloatSplitter, DH_ModuleKey and KDL_GUIFloat2GUIFloat modules
[Uploaded by bayantheone] |
| | tg_terminal.se1 | Connection Terminal
[Uploaded by efmsynth] |
| | RMS compressors examples.zip | Compressors based on RMS detector I posted - both functional, one simple and one more complicated.
[Uploaded by zillamarc] |
| | lfo_range_control.se1 | Component which controls the maximum and minimum values of an LFOs output
[Uploaded by chris_b_001] |
| | GC complexchoices.se1 | Complex choices: Multiple ways to choose from list entry
[Uploaded by ginocote] |
| | hats.zip | close hat mutes open hat
[Uploaded by mbreges] |
| | scala-SE2.zip | Cleanup. Nicer Synth. Cmd-file for batch converting added.
[Uploaded by brblpscht] |
| | SeqTest15a.zip | Chord note sequencing with delay experiment
[Uploaded by dolphinconsultant] |
| | Reverb Se1.se1 | cheap se1 reverb
[Uploaded by christo732003] |
| | casio-noise.se1 | Casio CZ Noise Waveform Generator
[Uploaded by synthedit] |
| | Noise Selector.se1 | can select just white or pink noise
[Uploaded by the_arketype] |
| | DH Button MIDI Keyboard.zip | Button to MIDI Note and MIDI Octave Selector Prefabs
[Uploaded by dhaupt72] |
| | number breakdown.se1 | Breaks a variable number down into # of one's, ten's, hundred's, thousands, ten-thousand's
[Uploaded by plutoniq9] |
| | max_BPM_LFO.se1 | BPM_LFO
[Uploaded by mbreges] |
| | CK_PingPongDly.zip | BPM-Synced Ping-Pong delay with filtering for feedback path. Uses CK_Dly module.
[Uploaded by platinumears2002] |
| | LFO-Sync.se1 | BPM-synced LFO with Sine, Saw, Ramp, Tri, Pulse, S&H, and Key Hold, all chosen via one switch.
[Uploaded by karlheinznoise] |
| | BPM to Delay.se1 | BPM host to delay time conversion prefab, based on PJ "BPMtoDelay" module, thanks to him for giving me the formula.
[Uploaded by matias_monteagudo] |
| | Tap Tempo.zip | Bonefish Sam's tap tempo prefab
[Uploaded by jimi_stravinsky] |
| | Down&UpDown_Counters.ZIP | Binary Down and Up/Down Counter prefabs. Also a full 8 Bit binary adder and binary display with decimal conversion.
[Uploaded by zip_oleighter] |
| | BIG STEREO CHORUS.se1 | BIG STEREO CHORUS: chorus with 4 waveforms and 4 delay. Plug and play. Try it and give me feedback :)
[Uploaded by ginocote] |
| | BellzNWhistlez.zip | Bellz N Whistlez Monophonic FM Synth
[Uploaded by stmpbmpl] |
| | BassAmpSim.rar | Bass Amp Sim
[Uploaded by runbeerrun] |
| | GuitarSynth.rar | Basic guitar synth prefab
[Uploaded by runbeerrun] |
| | BASE_AP.se1 | Base-extender with Allpass...have fun franky
[Uploaded by franky9900] |
| | BASE_1.se1 | Base- and Pan-Extender for manipulation of a stereo-signal
[Uploaded by franky9900] |
| | Par_Sat_Assym.zip | Assymetric Parabolic Saturation, ported from Sync Modular
[Uploaded by platinumears2002] |
| | CVSEQ16_DrA_2.zip | Another example of a 16 step CV-Sequencer
[Uploaded by guidogoe] |
| | Exponential Response ADSR.zip | An example of putting a response curve on the slopes of an envelope. Includes exponential and reverse exponential curves.
[Uploaded by toda_v] |
| | BalanceControl.zip | An alternative to the standard SE Pan module, for those who're having trouble using it in their designs. Requires Pan modulation input to be -5/+5 in range.
[Uploaded by collusioninc] |
| | 8stepbutton.zip | an 8 step button for switching page panels & outputs voltage at the same time
[Uploaded by psi_lus] |
| | microtuner.zip | A variation on the 'Temperaments' prefab, this has fixed offsets so that zeroing all the detune values results in equal temperament, rather than a pythagorean scale.
[Uploaded by platinumears2002] |
| | Bypass.zip | a simple Stereo bypass switch
[Uploaded by dazmusic2000] |
| | rzs-chorus.zip | A simple chorus
[Uploaded by rammerzs] |
| | sonicfire_lofi_effect.se1 | a simple but effective stereo LoFi effect with variable frequency
[Uploaded by sonicflash1980] |
| | Random_CV_Generator.zip | A random CV generator module with rate control. Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Waveform menu when you restart SynthEdit.
[Uploaded by collusioninc] |
| | Overdubbin` Loopa.zip | A quick prefab using a delay and sampler to create an overdubbing loop. READ THE README BEFORE RUNNING. Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Effects menu when you restart SynthEdit
[Uploaded by toda_v] |
| | fmonosynth.zip | A monophonic, four operator fm synth with 30 presets and low cpu usage.
[Uploaded by mandiblais] |
| | Chorus-Ensemble.zip | A mono input - stereo output Chorus/Ensemble type effect. Unzip the files to your Synthedit/prefabs/Effects directory.
[Uploaded by collusioninc] |
| | Multimeter for Synthedit.zip | A handy little gadget for measuring signals wherever needed. Made primarily for the design phase. Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Special menu when you restart SynthEdit.
[Uploaded by toda_v] |
| | StereoPanSet.se1 | A good sounfont to check the prefab is here: http://www.soundfonts.it/exec/zkdownload.pl?file=1115-Pad Wanderlust (652KB).zip
[Uploaded by mbreges] |
| | DVS_detuner.se1 | a fake-unison/detuner prefab.
[Uploaded by eshpar] |
| | FlipFlopPan.se1 | A Dual alternative Hard Pan gated prefab with sterreo spead
[Uploaded by unkargherth] |
| | ASDR Monostable.se1 | A different version of SE's monostable, useful for controlling ASDR times (e.g. Sustain Length if you feed it into an ASDR's Gate input). Pulse Length is on the same TimeCent scale as an ASDR. Supports retriggering - when triggered, outputs a very short (1ms) 0V pulse before going high again. Put it in Prefabs->Logic.
[Uploaded by karlheinznoise] |
| | DVS_Limit.se1 | A basic limiter/warper. "Limit" gets values from 0-10 Volts.
[Uploaded by eshpar] |
| | alpha_grid_8x8.rar | a 8x8 grid display feature emulation with 4 opacity steps
[Uploaded by opsis_novaflash] |
| | 5 Octave Range Switch.zip | A 2 up, 2 down octave switch for use with oscillators, wave file players, and filters working at 1 Volt per Octave. Unzip to your Synthedit/prefabs folder. The module should appear in your Insert>Controls menu when you restart SynthEdit
[Uploaded by toda_v] |
| | RhythmicGate.se1 | A 16-step Trance-Gate style effect
[Uploaded by bones121058] |
| | triple-click.se1 | [Uploaded by mbreges] |
| | MIDI_KBD_SEmodules_v1.1.zip | [Uploaded by mbreges] |
| | max_Autopanner.se1 | [Uploaded by mbreges] |
| | 8stage_env.se1 | [Uploaded by guidogoe] |
| | delaynoskin.se1 | [Uploaded by erici44] |
| | Stereo_Mono.zip | [Uploaded by crossingwires63] |
| | rzs-FXPack1.zip | 7 effects. Stereo Chorus, Flanger, Phaser, Rotator, 10Band eq, Vocoder and SupaDelay.
[Uploaded by rammerzs] |
| | MIDI_Keyboard (kirtan-3d).zip | 5 Octave Skinned Keyboard (MIDI) using "evm_keyboard_map" provided by evmsynths2000.
[Uploaded by aryankirtan] |
| | Vector-Joystick.se1 | 4-Way Vector control from joystick based on matrix code posted by D. Haupt
[Uploaded by evmsynths2000] |
| | Supressing artefacts on patch switching.zip | 4 supressing artefacts on patch switching uses LP patch pulse and SC:Slewer modules
[Uploaded by poly4tune] |
| | DVS_CrossOver.se1 | 3-band crossover with selectable steepness of filter, and no phase-differences between bands: mixing them back together would result in the same signal as the source
[Uploaded by eshpar] |
| | manualBPMsyncedLFO.zip | 3 waveforms LFO manualy sync to Tempo, can someone PLS help transform this into using BPM Clock Module ?
[Uploaded by boykisserick] |
| | DrA_Sequencers.zip | 3 triggersequencer prefabs (8,16 and 32 steps), using a stepcounter and some AND gates, plus a 16 step CVsequencer.
[Uploaded by guidogoe] |
| | button_pages.zip | 3 paged button stack using new sub-controls
[Uploaded by steve_hamann] |
| | 20radiobuttons.se1 | 20 radio buttons
[Uploaded by warlandr01] |
| | SV_4Pole_LP_Sat.zip | 2 SV filters arranged as 4 pole LP with distortion
[Uploaded by platinumears2002] |
| | SV_4Pole.zip | 2 cascaded SV filters with gain compensation & "analogue modelling"
[Uploaded by platinumears2002] |
| | 8_step_sequencers.zip | 2 analogue style 8-step sequencers, one has CV and Gate outputs, the other Trigger/Gate outputs.
[Uploaded by collusioninc] |
| | Linkwitz-Riley x-over.zip | 12db/Oct 3-Band Linkwitz-Riley Crossover
[Uploaded by aainslie] |
| | 12_Pulse_Train_B.se1 | 12_Pulse_Train with low cpu
[Uploaded by y_riyadi] |
| | Muilti-Filter.se1 | 12-24-36-dbfilter
[Uploaded by ianwebster123] |
| | additive.se1 | 12 partial additive synth by Pilchard, contains frequency conversion formula by chris_b
[Uploaded by fat_ass_tk] |
| | Animated JoystickIn.zip | .se1 demo of controlling SE on-screen Joystick module with DH's Joystick In module
[Uploaded by dhaupt72] |