| | Go up | .. |
| | Wiring-Popup-Listentry3.jpg | Wiring SE PopUp-ListEntry- & Arrows
[Uploaded by poly4tune] |
| | vibenv.se1 | delay for lfo, uses Dave Haupt's env seg
[Uploaded by mkjnovak] |
| | Triggerpad.rar | Triggerpad
[Uploaded by jr129s] |
| | Trigger.gif | Basic Sequencer Screen Shot
[Uploaded by aversanomusic] |
| | testsetup.jpg | Test setup for exp adsr / envolpe
[Uploaded by gdm_seluve] |
| | test_SVFilter_Waveguide_2_(FM).se1 | FM Synthesis without oscillators. This little project simulates an FM piano with just an ADSR as pulse generator, SVFilter as oscillator and a Delay2 as FM modulator. Anyway you may notice a strange behavior when playing with the sustain pedal hold: push the pedal, play the first note gently then the same note again hardly then release the pedal, you can hear the previous note still playing. It's as if the gate pin out of the MIDI2CV module does not transmit the 0v status to all clones. Why?....
[Uploaded by ziokiller] |
| | Test_SVFilter_Osc_1.se1 | This se1 file demonstrates how to use a SVFilter as a sine oscillator for physical modeling string or piano sounds.
[Uploaded by ziokiller] |
| | Test midi-output panel control.se1 | Sampler panel test (help please)
[Uploaded by jr129s] |
| | TECH3010_w.se1 | Please Help! My project so far - check out the ModWheel and ADSR Filter areas
[Uploaded by beastlygoblin] |
| | TD_ADSRrc3.zip | Expo ADSR Beta2
[Uploaded by aainslie] |
| | Stepper-2.jpg | Stepper 2 problem
[Uploaded by aversanomusic] |
| | sendProgChng.se1 | send program change from VSTi
[Uploaded by poly4tune] |
| | PitchToZone.rar | Split pitch signal into 6 user definable keyzones using standard logic/gates
[Uploaded by laconicfunk] |
| | PitchSplitter.se1 | Split Note
[Uploaded by mbreges] |
| | oscmorph.se1 | xmixing between two oscillators
[Uploaded by benalthauser] |
| | opto-phaser.se1 | CPU reduction for Optimised Phaser
[Uploaded by evmsynths2000] |
| | note_presets_x1.se1 | for aversanomusic
[Uploaded by mbreges] |
| | Note presets.se1 | File for mbreges
[Uploaded by aversanomusic] |
| | MultiStepFilt1.se1 | MultiStepFilter
[Uploaded by synthedituser] |
| | Midi Delay Exp.zip | Delays poly midi signals 1-10 secs !
[Uploaded by evmsynths2000] |
| | LFO_5-10V.se1 | LFO with output range 5 to 10 Volt
[Uploaded by poly4tune] |
| | knob.JPG | Screenshot of subcontrol / text IO problem
[Uploaded by gypsygeek] |
| | KeyZones.zip | for Topcat
[Uploaded by mbreges] |
| | incr_invert.se1 | for bayantheone
[Uploaded by mbreges] |
| | gui_range_bar.se1 | a quite bad implementation of creating a range bar.
[Uploaded by angstrom_000] |
| | graphic_env_cpu.se1 | Using DH_waveshaper to CV for env .. but it has problems
[Uploaded by angstrom_000] |
| | double knob.se1 | Double Knob
[Uploaded by aversanomusic] |
| | DH Array Sequencer Test.se1 | Shows problem with resolution of dh array sequencer module
[Uploaded by typetosmurky] |
| | Basic Synth Template.se1 | Basic synth template !
[Uploaded by evmsynths2000] |
| | Basic Sequencer.se1 | [Uploaded by aversanomusic] |
| | atanh waveshaper2.se1 | trying to achieve atanh with waveshaper2
[Uploaded by plutoniq9] |
| | 050.se1 | Logic problem 0 <-- 5 --> 0
[Uploaded by evmsynths2000] |