|  | Go up | .. |
|  | 050.se1 | Logic problem 0 <-- 5 --> 0
[Uploaded by evmsynths2000] |
| | atanh waveshaper2.se1 | trying to achieve atanh with waveshaper2
[Uploaded by plutoniq9] |
| | Basic Sequencer.se1 | [Uploaded by aversanomusic] |
| | Basic Synth Template.se1 | Basic synth template !
[Uploaded by evmsynths2000] |
| | DH Array Sequencer Test.se1 | Shows problem with resolution of dh array sequencer module
[Uploaded by typetosmurky] |
| | double knob.se1 | Double Knob
[Uploaded by aversanomusic] |
| | graphic_env_cpu.se1 | Using DH_waveshaper to CV for env .. but it has problems
[Uploaded by angstrom_000] |
| | gui_range_bar.se1 | a quite bad implementation of creating a range bar.
[Uploaded by angstrom_000] |
| | incr_invert.se1 | for bayantheone
[Uploaded by mbreges] |
|  | KeyZones.zip | for Topcat
[Uploaded by mbreges] |
|  | knob.JPG | Screenshot of subcontrol / text IO problem
[Uploaded by gypsygeek] |
| | LFO_5-10V.se1 | LFO with output range 5 to 10 Volt
[Uploaded by poly4tune] |
| | Midi Delay Exp.zip | Delays poly midi signals 1-10 secs !
[Uploaded by evmsynths2000] |
| | MultiStepFilt1.se1 | MultiStepFilter
[Uploaded by synthedituser] |
| | Note presets.se1 | File for mbreges
[Uploaded by aversanomusic] |
| | note_presets_x1.se1 | for aversanomusic
[Uploaded by mbreges] |
| | opto-phaser.se1 | CPU reduction for Optimised Phaser
[Uploaded by evmsynths2000] |
| | oscmorph.se1 | xmixing between two oscillators
[Uploaded by benalthauser] |
| | PitchSplitter.se1 | Split Note
[Uploaded by mbreges] |
|  | PitchToZone.rar | Split pitch signal into 6 user definable keyzones using standard logic/gates
[Uploaded by laconicfunk] |
| | sendProgChng.se1 | send program change from VSTi
[Uploaded by poly4tune] |
| | Stepper-2.jpg | Stepper 2 problem
[Uploaded by aversanomusic] |
| | TD_ADSRrc3.zip | Expo ADSR Beta2
[Uploaded by aainslie] |
| | TECH3010_w.se1 | Please Help! My project so far - check out the ModWheel and ADSR Filter areas
[Uploaded by beastlygoblin] |
| | Test midi-output panel control.se1 | Sampler panel test (help please)
[Uploaded by jr129s] |
| | Test_SVFilter_Osc_1.se1 | This se1 file demonstrates how to use a SVFilter as a sine oscillator for physical modeling string or piano sounds.
[Uploaded by ziokiller] |
| | test_SVFilter_Waveguide_2_(FM).se1 | FM Synthesis without oscillators. This little project simulates an FM piano with just an ADSR as pulse generator, SVFilter as oscillator and a Delay2 as FM modulator. Anyway you may notice a strange behavior when playing with the sustain pedal hold: push the pedal, play the first note gently then the same note again hardly then release the pedal, you can hear the previous note still playing. It's as if the gate pin out of the MIDI2CV module does not transmit the 0v status to all clones. Why?....
[Uploaded by ziokiller] |
| | testsetup.jpg | Test setup for exp adsr / envolpe
[Uploaded by gdm_seluve] |
| | Trigger.gif | Basic Sequencer Screen Shot
[Uploaded by aversanomusic] |
| | Triggerpad.rar | Triggerpad
[Uploaded by jr129s] |
| | vibenv.se1 | delay for lfo, uses Dave Haupt's env seg
[Uploaded by mkjnovak] |
| | Wiring-Popup-Listentry3.jpg | Wiring SE PopUp-ListEntry- & Arrows
[Uploaded by poly4tune] |
